How Much Does Garage Door Spring Replacement Cost? (2026 Guide)
Published June 11, 2026
Garage door spring replacement is the most common repair in the industry, and the honest national answer for 2026 is: $150 to $290 for a single torsion spring, $200 to $450 for both springs on a standard double door, parts and labor included. Extension spring pairs on older or lighter doors run $130 to $250.
If you’ve been quoted far outside those ranges — in either direction — keep reading.
What you’re actually paying for
The spring itself is the cheap part. A standard residential torsion spring wholesales for $20 to $50. The rest of the invoice is the service visit (typically $50–$90 to roll a truck), 45–60 minutes of skilled labor that genuinely is dangerous without training and winding bars, and the business behind it — insurance, stocked trucks, and someone answering the phone at 7 AM.
That math is why two numbers should make you skeptical:
- Quotes above $500–$600 for a standard residential double door. Unless your door is oversized, custom, or commercial-grade, you’re being overcharged.
- Ads below $100 — “$89 complete spring replacement” is the classic bait. The price converts to $500–$700 in your driveway through invented add-ons: “your drums are shot,” “these cables must be replaced,” “you need a center bearing kit.” Some of those parts sometimes do need replacing — but a company that advertises an impossible price planned the upsell before the truck left the lot.
The factors that legitimately move the price
One spring or two. If your double door runs two torsion springs and one broke, replace both — they have identical fatigue and the survivor typically fails within months. Doing both in one visit adds $60–$120; a second service call later costs the full trip charge again. This is the one “upsell” that’s genuinely in your interest.
Cycle rating. Builder-grade springs are rated 10,000 cycles. A family that uses the garage as the front door burns through that in 3–5 years. High-cycle springs (25,000–50,000) add $30–$80 per spring and roughly triple the life — usually the best money on the invoice.
Spring size. Heavier doors (insulated steel, wood, oversized) need thicker-wire springs that cost more and may need to be ordered.
Climate hardware. In humid or coastal metros, galvanized or powder-coated springs resist the rust that shortens spring life — typically +$40–$80 for the pair and worth it. (See our city pages for local pricing and climate notes.)
Timing. Nights, weekends, and holidays carry a $50–$150 after-hours premium. The repair itself should cost the same as in daylight.
Can you replace a spring yourself?
We’re obligated to say it plainly: torsion springs store enough energy to lift a 200-pound door thousands of times, and releasing that tension without winding bars and training causes serious injuries every year. Extension springs are no safer to handle. This is one of the few home repairs where the professional consensus — including from people with no financial stake — is simply don’t.
How to get a fair price in one phone call
Ask three questions before booking:
- “What’s the all-in price to replace both torsion springs on a standard 16x7 double door?” — A legitimate company gives you a range over the phone.
- “Is the service call fee applied to the repair?” — It should be.
- “What cycle rating are the springs, and what does the high-cycle upgrade cost?” — This question signals you know the market, and the answer tells you whether they stock quality parts.
A company that dodges all three is planning to price you in the driveway, where saying no is hardest.
Need it done today? Call us and we’ll connect you with a vetted local pro who quotes before the work starts.